-
100 ₽The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technologyЛипецк -
100 ₽The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technologyЛипецк -
100 ₽This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the ALPHASET, PEP SET, CO2, COLD-BOX Resol + CO2, and FURAN proЛипецк -
100 ₽This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the ALPHASET, PEP SET, CO2, COLD-BOX Resol + CO2, and FURAN proЛипецк -
100 ₽High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hourЛипецк -
100 ₽The hardness tester for dry molds and cores model 04421 is designed to measure the hardness surfaces of dry molds and cores in molding and core sections of foundries, in workshop and factory laboratorЛипецк -
100 ₽The device is designed to determine the crumbling of molding and core sands in accordance with GOST and moldability in accordance with GOST 23409.15-78Липецк -
100 ₽The core box is designed for the production of samples of molding and core sands tested in tensionЛипецк -
100 ₽Sleeve model 09721 is intended for the manufacture of cylindrical samples from wet sands of molding and core sands for determining gas permeability in accordance with GOST and compressive strength inЛипецк -
100 ₽Koper laboratory model 5033A is designed for the production of standard samples of mixtures according to GOST when determining the physical and technological properties of molding materials and core mЛипецк -
100 ₽The machine is designed to determine the tensile strength and elongation of molding and core sands in a dry or cured state in accordance with GOST 23409.7-78Липецк -
100 ₽The machine is designed to determine the ultimate compressive strength of molding and core sands in the green stateЛипецк -
100 ₽The machine is designed to determine the ultimate compressive strength and shear strength of molding and core sands in the green state and bending in the dry or hardened state in accordance with GOSTЛипецк -
100 ₽Installation laboratory model 029, climatic version UHL, placement category according to GOST 15150-69, is designed to separate the sandy base of molding sand into fractions by grain size and is usedЛипецк -
20 000 ₽Электродвигатель N=18,5кВт, n = 1500об/мин, бывший в употреблении в хорошем состоянии, крепление - комбинированноеЛипецк -
Наше предприятия специализируется на покупку запчастей от кранов Башенных,Мостовых,Козловых! ================================== краткое наименования что нас интересует!! Крановые колеса: Колесо К2РЛипецк -
OOO Cтeeл-Cepвиc кpaткoe нaимeнoвaния чтo в нaшeм интepece ========================================= Koлeca K2P K1P вcex paзмepoв. Kpюкoвыe пoдвecки (Гaки) xoдoвыe тeлeжки. тopмoзныe кoлoдкиЛипецк