Лабораторное оборудование в Белгородской области

СПЕКТРАЛЬНЫЕ ЭЛЕКТРОДЫ С3М ,6Х200ММ ДЛЯ ЛАБОРАТОРИИ ХИМ АНАЛИЗ 8 916 602 39 19

ООО «Поволжский Завод Энергетического Оборудования» предлагает УВФ-250, УВФ-500, УВФ-1000, УВФ-2000, УВФ-3000, УВФ-5000, УВФ-10000: Мобильная установка предназначена для обработки как малых, так и бол

Реализация вакуумметров ВИТ-2, ВИТ-3, 13ВТ3-003, ВМБ-14, ВМЦБ-12, ВТ-6 . Поверка по требованию, гарантия. Преобразователи : ПМИ-2, ПМТ-2, ПМИ-51, ПМТ-4м, ПММ-32 и др. по заказу

Настольный стоматологический сканер Medit T710 поставляется в заводской упаковке со всеми аксессуарами и программами, оригинальными и с двухлетней гарантией

спектральные электроды с3м ,6х200мм для лаборатории кабель 4квэл-60 для электронно лучевого оборудования 8 916 602 39 19

5-осевая стоматологическая мельница Roland DWX-52DCi с автоматическим устройством смены дисков запечатана в заводской упаковке со всеми принадлежностями и программами, аутентична и имеет двухлетнюю га

ООО «Литмашприбор» производит следующий перечень приборов для лабораторий литейных цехов: - Определения зернового состава песка Модель 029, Модель 01412, Модель 026 - Машины для определения предела

The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-scale production The company "Litmashpribor" has the abilit

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long

High-speed single-arm continuous mixer with a capacity of 3 to 10 tons of molding sand per hour

High-speed single-arm continuous mixer with a capacity of 0.5 to 2 tons of molding sand per hour

Apparatus for accelerated moisture determination: model 062M3 is designed for drying mixture samples in the process of moisture determination in shop, factory laboratories, as well as in laboratories

The apparatus for determining the clay component model 01315M is designed to determine the clay component in accordance with GOST and for the preparation of suspensions and solutions in molding materi

Hardness tester for raw molds, rods model 04412A is designed to measure the hardness surfaces of raw molds and rods, as well as to determine the fluidity of molding sands in accordance with GOST in mo

The attachment for determining gas permeability model: 01511M, climatic version UHL, placement category 4

The bell-type device for determining gas permeability 04315 is designed to determine the gas permeability of wet sands and wet, dry or hardened samples of molding and core sands in accordance with GOS

The funnel model 09730 is used to fill the moldable mixture of the product into the sleeve model 09722 or 09721 when determining the compaction and bulk density, as well as when determining the gas pe

Sleeve model 09722 is designed to determine compaction and bulk density in accordance with GOST The principle of the liner operation is to obtain a sample of the mixture poured into the liner and comp

The mixer is designed for the preparation of experimental control compositions from molding and core sands with pulverized, liquid and viscous additives